According to the folks at Yakima, the front clamp is integrated into the rack and isn't removable, with the exception of the front tensioning handle, which is available as part # 8880190. The rear clamp assembly is available as part # 8880208. The assembly includes the tray mount, top pads, bottom aero mount, screw and top fastener. view full answer...
The correct replacement leaf springs for a Malone MicroSport Trailer part # MPG460G are the 2-Leaf Slipper Springs part # e36SR. These will be a direct fit replacement for the old springs. They are slipper springs with a 500 lb weight capacity that measure 24-5/8" long. That said, if you want to upgrade to a higher capacity, the 4-Leaf Slipper Springs part # e69SR are a fit as well. view full answer...
You can use the Trailer Connector Adapter # 337TC1474P to replace your connection as we do not have a replacement cover for the 7-Way RV Upgrade Kit # ETBC7L. The new connector will plug in just like your current unit and has the same 4-way and 7-way connectors. You will only need a set of Wiring Pliers # PT43ZR to cut the old power wire and install the new connector. Be sure to disconnect the battery before cutting any wiring. view full answer...
You probably already know that the correct hardware for the Thule Adventurer cargo box is the QM3 hardware, # TH04997. Provided that the crossbar diameter is no larger than 3-5/8 inches, this hardware will fit the crossbars on the 2011 Subaru Outback.
The QuickSnap mounts have been discontinued and would not have fit without modifications to your box. view full answer...
For replacement hardware for your # e98847 you need the Replacement Hardware Kit # RHK. You will need to enter e98847 in the "Hitch Item Number" field and then choose etrailer in the drop down menu under "Manufacturer." I went ahead and included an installation video on a 2015 Outback for your reference. view full answer...
Yes, the MaxxAir TuffMaxx Replacement RV Air Conditioner Cover # MA00-325001 will fit your Coleman Mach 8633-876 A/C. The 8633-876 is a Coleman Mach 3 and the # MA00-325001 is confirmed to fit the Coleman Mach 3 Models. view full answer...
The Replacement Mounting Bracket # 2178 is designed to fit several different brake controllers and has similar mounting holes to your Dexter Predator DX2. New mounting hardware is also included. view full answer...
Yes new hardware is available for the Draw-Tite # 36493 you're removing.
You'll just need the # RHK which includes all of the new hardware and everything needed to get the hitch installed for your buyer. Just select Draw-Tite from the drop down menu, and enter 36493 as the hitch model number. view full answer...
Thanks for reaching out! For the SkyLine Towers you'll need to use the current Yakima Same Key System Lock Cores which can be found as part # Y07204. Yakima changed their lock core system back in the 90's so all of the current lock cores have an A followed by 3 digits for their core number. These can be interchanged with any of the Yakima products. Anything before that is a specific lock core that was designed to work with that product only. view full answer...
There is indeed a suitable replacement.
The Fulton 1588S00 was replaced by the # F501115 which we carry. They are sold in a quantity of 2. view full answer...
It sounds like you have the QM3 Quick Mount Hardware part # TH04997 on your Thule Excursion Cargo Box TH667 and if that is the case I have attached the parts I believe you are looking for below:
Replacement Quick On/Off Bracket part # TH04973
Carriage Bolt M6-1 x 75mm part # TH10403
If this is not what you need please just let me know. view full answer...
I have a solution for you, but the Inno # INBRP9 haven't been tested and I doubt they could be made to work without damaging the box too much. Instead, I recommend using the Replacement Quick Grip Mount Assembly - Thule Ascent, Atlantis, and Force Cargo Box - Qty 1 # TH05738, which are the correct replacement clamping hardware for a Thule Ascent 1600 cargo box. view full answer...
We have the Replacement Echo Brake Controller Strap, part # C28HR, here. This will replace the strap on your Curt Echo, part # C51180. view full answer...
It depends on your bike mount and brand. Yakima has their Universal Mighty Mounts # Y03590 that should help with most of your Yakima carriers.
Thule has their Xadapt series: # Xadapt1 and # Xadapt2 for crossbars that have a t-track in them. If not, they have this old Ride-On Adapter that is now only available in its individual parts:
4 of the # 915-0625-54
4 of the # 853-2154
4 of the # 853-2156
4 of the # 853-5267
4 of the # 753-2854
4 of the # 936060054
4 of the # 853-5269
8 of the... view full answer...
On your 1999 Thor Tahoe Lite, the axles have 10 inch brake assemblies based on my research. For the cost, I recommend replacing them with the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35 instead of just getting the brake magnet and shoe replacements as all the components get upgraded for similar cost. If you want to upgrade to the self adjusting assemblies for easier maintenance, I recommend the Electric Trailer Brake Kit - Self-Adjusting -... view full answer...
Thanks for the photo. To get that t-bolt, you may want the Yakima HullRaiser to HullRaiser Aero Conversion Kit # Y8860031 or the Replacement T-Bolts for Yakima ShowBoat, Aero Bar, or Universal Mount Roof-Rack Accessories # 8860061. Unfortunately there isn't a specific replacement for your older box. view full answer...
You can replace the mounting bracket and hardware on an # FXP10W0301 or # MJ-1200B, but the tube and swivel bracket are not available as replacement parts for these jacks. You can use the Replacement Mounting Kit for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs # MJ-1000B-MK for the mounting bracket and Replacement Mounting Hardware for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs # MJ-1000B-MBB for the hardware. You can also replace the inner bearing... view full answer...
The Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer # Y08121 has
wheel dimensions of 16" diameter x 1.85" wide and tire dimensions of 16" diameter x 3.25" wide. This is the tire # Y8880282 you referenced with inner tube # Y8880283.
I believe this is the newer wheel option for the same trailer fit. If you measure your wheel and tire you will be able to determine if it is the correct fit or if you need to replace the wheel as well. For complete replacement you can use the... view full answer...
I spoke with my contact at Thule who said that the only thing that was able to adapter your Thule Cascade roof box to aero style bars was the XADAPT10 adapter kit but that has been discontinued for quite awhile.
At this point in time you either need to replace your cargo box or see if there are any places that carry the older XAPAT10 kit for you to use. view full answer...
For the Yakima SwingDaddy 4 Bike Rack, you will want the Replacement Wrench # 8890285 and I believe you are looking for either the Replacement hitch pin # 889-0231 or Replacement Speed Knob and Wedge Assembly # 8880508.
If you need anything else, let me know. The costs are listed below or on the individual product pages. view full answer...
Go To Results